Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

X-372 Mast head rigging

Sailboat specifications

The X-372 is a 36’4” (11.05m) cruiser-racer sailboat designed by Niels Jeppesen (Denmark). She was built between 1987 and 1992 by X-Yachts (Denmark) with 120 hulls completed. The Mast head rigging version is offered with a classic masthead Marconi sloop rig.

The X-372 is as well listed, on Boat-Specs.com, in Fractional rigging version (see all the versions compared).

X-372's main features

Model
X-372
Version
Mast head rigging
Hull type
Monohull
Category
Cruiser-racer sailboat
Sailboat builder
Sailboat designer
Country
Denmark
Construction
GRP (glass reinforced polyester):
Sandwich fiberglass polyester with galvanized steel frame
Number of hulls built
120
First built hull
1987
Last built hull
1992
Appendages
Keel : fin without bulb
Helm
Single tiller (helm wheel in option)
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
Standard public price ex. VAT (indicative only)
N/A

X-372's main dimensions

Overall length
37’ 8”11.48 m
Hull length
36’ 4”11.05 m
Waterline length
29’ 6”9 m
Beam (width)
11’ 8”3.57 m
Draft
6’ 7”2 m
Light displacement (MLC)
11244 lb5100 kg
Ballast weight
4850 lb2200 kg
Ballast type
Cast iron / lead fin

X-372's rig and sails

Upwind sail area
818 ft²76 m²
Downwind sail area
1419 ft²131.8 m²
Mainsail area
304 ft²28.2 m²
Genoa area
515 ft²47.8 m²
Solent area
343 ft²31.9 m²
Stormjib area
108 ft²10 m²
Symmetric spinnaker area
1115 ft²103.6 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
0 °
Spars construction
Aluminum spars

X-372's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
276 ft²/T25.65 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
479 ft²/T44.48 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
198
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
43 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.28 knots

X-372's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
28 HP
Fuel type
Diesel

X-372's accommodations and layout

Cockpit
Open aft cockpit
Cabin(s)
2
Berth(s) (min./max.)
4 / 6
Head(s)
1
Maximum headroom
6’ 2”1.9 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
IMX 38 (X-Yachts)
1992
37’ 5”11.4 m
X-342 Mast head rigging (X-Yachts)
1988
33’ 6”10.22 m
X-372 Fractional rigging (X-Yachts)
1987
36’ 4”11.05 m
Oyster SJ35 (Oyster)
1983
34’ 10”10.6 m
First 35.7 Lead keel (Bénéteau)
1992
34’ 7”10.55 m
X-312 Mast head rigging (X-Yachts)
1989
30’ 4”9.25 m
First 35S5 Lead keel (Bénéteau)
1988
34’ 10”10.6 m
First 36.7 Deep draft (Bénéteau)
2002
35’10.68 m
First 36s7 Regatta (Bénéteau)
1995
34’ 5”10.49 m
First 345 Deep draft (Bénéteau)
1983
34’ 7”10.55 m
First 35 - Berret Deep draft (Bénéteau)
1979
34’ 10”10.6 m
X-362 Classic (X-Yachts)
1998
35’ 2”10.73 m
First 375 Deep draft (Bénéteau)
1985
37’11.27 m
Grand Soleil 37 - B&C Shoal draft (Cantiere Del Pardo)
2005
37’ 1”11.3 m
X-37 Standard (X-Yachts)
2004
37’ 2”11.35 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more