The
Oyster 745 is a 71’8” (21.86m) cruising sailboat designed by
Humphreys Yacht Design (United Kingdom). She is built since 2014 by
Oyster (United Kingdom). The
Keel and centerboard version features a centerboard inside of a short fin-keel allowing shoal draft while maintaining upwind capabilities. She has been awarded "
2018 - Cruising World - Boat of the Year: Luxury Cruiser".
The
Oyster 745 is as well listed, on Boat-Specs.com, in
Standard version (
see all the versions compared).
Oyster 745's main features
Model
Oyster 745
Version
Keel and centerboard
Hull type
Monohull
Category
Offshore deck saloon cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2014
Last built hull
Still in production
Award(s)
- 2018: Cruising World - Boat of the Year: Luxury Cruiser
Appendages
Centerboard : pivoting centerboard in the keel
Helm
Twin helm wheels
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
EC design category
iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5mA
Standard public price ex. VAT (indicative only)
Oyster 745's main dimensions
Overall length
74’ 7”22.74 m
Hull length
71’ 8”21.86 m
Waterline length
65’ 10”20.07 m
Beam (width)
19’ 5”5.91 m
Draft
15’ 7”4.75 m
Draft when appendages up
6’ 11”2.1 m
Mast height from DWL
110’ 7”33.7 m
Light displacement (MLC)
115963 lb52600 kg
Oyster 745's rig and sails
Upwind sail area
3001 ft²278.8 m²
Rigging type
Sloop Marconi 9/10
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Oyster 745's performances
Upwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.214 ft²/T19.86 m²/T
Displacement-length ratio (DLR)
iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.184
Critical hull speed
iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.10.87 knots
Oyster 745's auxiliary engine
Engine(s)
1 inboard engine
Engine(s) power
247 HP
Fuel type
Diesel
Fuel tank capacity
528.3 gal2000 liters
Oyster 745's accommodations and layout
Cockpit
Center cockpit
Cabin(s) (min./max.)
3 / 5
Berth(s) (min./max.)
6 / 10
Head(s)
4
Freshwater tank capacity
396.3 gal1500 liters
Have you spotted incorrect data?
You can report it in the forum or
contact the webmaster