Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Oyster 675 Keel and centerboard

Sailboat specifications

The Oyster 675 is a 65’4” (19.89m) cruising sailboat designed by Humphreys Yacht Design (United Kingdom). She is built since 2014 by Oyster (United Kingdom). The Keel and centerboard version features a centerboard inside of a short fin-keel allowing shoal draft while maintaining upwind capabilities.

The Oyster 675 is as well listed, on Boat-Specs.com, in Standard version (see all the versions compared).

Oyster 675's main features

Model
Oyster 675
Version
Keel and centerboard
Hull type
Monohull
Category
Offshore deck saloon cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2014
Last built hull
Still in production
Appendages
Centerboard : pivoting centerboard in the keel
Helm
Twin helm wheels
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
3 500 000
 (2016)

Oyster 675's main dimensions

Overall length
69’ 1”21.07 m
Hull length
65’ 4”19.89 m
Waterline length
59’ 7”18.16 m
Beam (width)
18’ 6”5.65 m
Draft
14’ 8”4.48 m
Draft when appendages up
6’ 2”1.9 m
Mast height from DWL
100’ 11”30.75 m
Light displacement (MLC)
93829 lb42560 kg

Oyster 675's rig and sails

Upwind sail area
2465 ft²229 m²
Rigging type
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
Swept-back
Spars construction
Aluminum spars

Oyster 675's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
202 ft²/T18.79 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
201
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
10.34 knots

Oyster 675's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
180 HP
Fuel type
Diesel
Fuel tank capacity
501.9 gal1900 liters

Oyster 675's accommodations and layout

Cockpit
Center cockpit
Cabin(s) (min./max.)
4 / 5
Berth(s) (min./max.)
8 / 10
Head(s) (min./max.)
3 / 4
Freshwater tank capacity
409.5 gal1550 liters
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Super Maramu (Amel)
1988
52’ 6”16 m
Amel 64 (Amel)
2010
63’ 1”19.22 m
Jeanneau 64 Standard (Jeanneau)
2014
64’ 1”19.55 m
Hallberg-Rassy 64 (Hallberg-Rassy)
2011
65’ 1”19.85 m
Oyster 575 Keel and centerboard (Oyster)
2010
57’ 6”17.53 m
Oyster 625 Keel and centerboard (Oyster)
2011
62’ 5”19.03 m
Oyster 545 Keel and centerboard (Oyster)
2013
52’ 11”16.12 m
Oyster 675 Standard (Oyster)
2014
65’ 4”19.89 m
Oyster 745 Keel and centerboard (Oyster)
2014
71’ 8”21.86 m
Oyster 54 Keel and centerboard (Oyster)
2013
52’ 11”16.12 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Contest 62CS Standard (Conyplex)
2007
62’ 11”19.18 m
Oyster 565 Keel and centerboard (Oyster)
2019
56’ 6”17.22 m
Hylas 63 (Hylas Yachts)
2013
63’ 1”19.23 m
Oyster 595 Keel and centerboard (Oyster)
2019
59’ 6”18.14 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more