Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Oyster 625 Standard

Sailboat specifications

The Oyster 625 is a 62’5” (19.03m) cruising sailboat designed by Humphreys Yacht Design (United Kingdom). She was built between 2011 and 2019 by Oyster (United Kingdom). She has been awarded "2012 - European Yacht of the Year: Luxury Cruiser".

The Oyster 625 is as well listed, on Boat-Specs.com, in Shoal draft and Keel and centerboard version (see all the versions compared).

Oyster 625's main features

Model
Oyster 625
Version
Standard
Hull type
Monohull
Category
Offshore deck saloon cruising sailboat
Sailboat builder
Sailboat designer
Country
United Kingdom
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2011
Last built hull
2019
Award(s)
  • 2012: European Yacht of the Year: Luxury Cruiser
    Appendages
    Keel : L-shaped keel (with bulb)
    Helm
    Twin helm wheels
    Rudder
    Single rudder on skeg
    Unsinkable
    No
    Trailerable
    No
    EC design category
     iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

    A: Wind < force 9, Waves < 10m
    B: Wind < force 8, Waves < 8m
    C: Wind < force 6, Waves < 4m
    D: Wind < force 4, Waves < 0,5m
    A
    Standard public price ex. VAT (indicative only)
    About 
    2 680 000 €
     (2016)

    Oyster 625's main dimensions

    Overall length
    63’ 6”19.37 m
    Hull length
    62’ 5”19.03 m
    Waterline length
    56’ 7”17.24 m
    Beam (width)
    17’ 10”5.44 m
    Draft
    9’ 2”2.8 m
    Mast height from DWL
    89’ 2”27.2 m
    Light displacement (MLC)
    77823 lb35300 kg

    Oyster 625's rig and sails

    Upwind sail area
    2539 ft²235.9 m²
    Rigging type
    Sloop Marconi 19/20
    Mast configuration
    Deck stepped mast
    Rotating spars
    No
    Number of levels of spreaders
    3
    Spreaders angle
    Swept-back
    Spars construction
    Aluminum spars

    Oyster 625's performances

    Upwind sail area to displacement
     iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

    The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

    Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
    236 ft²/T21.92 m²/T
    Displacement-length ratio (DLR)
     iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
    The DLR can be used to compare the relative mass of different sailboats no matter what their length:

    a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
    195
    Critical hull speed
     iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
    The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
    10.08 knots

    Oyster 625's auxiliary engine

    Engine(s)
    1 inboard engine
    Engine(s) power
    180 HP
    Fuel type
    Diesel
    Fuel tank capacity
    475.5 gal1800 liters

    Oyster 625's accommodations and layout

    Cockpit
    Center cockpit
    Cabin(s) (min./max.)
    4 / 5
    Berth(s) (min./max.)
    8 / 11
    Head(s)
    3
    Freshwater tank capacity
    317 gal1200 liters
    Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

    Similar sailboats that may interest you:


    Sailboats
    First built hull
    Hull length
    Super Maramu (Amel)
    1988
    52’ 6”16 m
    Hallberg-Rassy 62 (Hallberg-Rassy)
    1997
    61’ 11”18.88 m
    Amel 64 (Amel)
    2010
    63’ 1”19.22 m
    Jeanneau 64 Standard (Jeanneau)
    2014
    64’ 1”19.55 m
    Hallberg-Rassy 64 (Hallberg-Rassy)
    2011
    65’ 1”19.85 m
    Oyster 575 Standard (Oyster)
    2010
    57’ 6”17.53 m
    Oyster 625 Shoal draft (Oyster)
    2011
    62’ 5”19.03 m
    Oyster 675 Standard (Oyster)
    2014
    65’ 4”19.89 m
    Oyster 745 Standard (Oyster)
    2014
    71’ 8”21.86 m
    Super Maramu 2000 (Amel)
    2000
    52’ 6”16 m
    Amel 50 (Amel)
    2017
    50’ 11”15.51 m
    Contest 62CS Standard (Conyplex)
    2007
    62’ 11”19.18 m
    Oyster 565 Standard (Oyster)
    2019
    56’ 6”17.22 m
    Hylas 63 (Hylas Yachts)
    2013
    63’ 1”19.23 m
    Oyster 595 Fin keel (Oyster)
    2019
    59’ 6”18.14 m
    Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

    Read more