Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Nauticat 37

Sailboat specifications

The Nauticat 37 is a 36’10” (11.23m) cruising sailboat designed by Siltala Design Office (Finland). She was built between 2002 and 2018 by Nauticat Yachts (Finland).

Nauticat 37's main features

Model
Nauticat 37
Hull type
Monohull
Category
Deck saloon cruising sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
Finland
Construction
GRP (glass reinforced polyester):
Single skin fiberglass polyester
First built hull
2002
Last built hull
2018
Appendages
Keel : fin with bulb
Helm
Twin helm wheels
Rudder
Single semi-spade rudder
Unsinkable
No
Trailerable
No
EC design category
 iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5m
A
Standard public price ex. VAT (indicative only)
About 
318 000 €
 (2017)

Nauticat 37's main dimensions

Hull length
36’ 10”11.23 m
Waterline length
33’ 1”10.1 m
Beam (width)
11’ 10”3.6 m
Draft
6’ 1”1.85 m
Mast height from DWL
54’ 10”16.7 m
Light displacement (MLC)
20944 lb9500 kg
Ballast weight
6724 lb3050 kg
Ballast type
Lead

Nauticat 37's rig and sails

Upwind sail area
807 ft²75 m²
Downwind sail area
1475 ft²137 m²
Mainsail area
344 ft²32 m²
Genoa area
463 ft²43 m²
Solent area
388 ft²36 m²
Stormjib area
108 ft²10 m²
Symmetric spinnaker area
1130 ft²105 m²
Gennaker area
1044 ft²97 m²
Rigging type
Sloop Marconi masthead
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
0 °
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Nauticat 37's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
180 ft²/T16.72 m²/T
Downwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
329 ft²/T30.54 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
261
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
32 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.71 knots

Nauticat 37's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
54 HP
Fuel type
Diesel
Fuel tank capacity
88.5 gal335 liters

Nauticat 37's accommodations and layout

Cockpit
Center cockpit
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
4 / 8
Head(s) (min./max.)
1 / 2
Freshwater tank capacity
116.2 gal440 liters
Holding tank capacity
23.8 gal90 liters
Fridge/ice-box capacity
26.4 gal100 liters
Galley headroom
6’ 1”1.85 m

Nauticat 37's saloon

Maximum headroom
6’ 7”2 m

Nauticat 37's fore cabin

Maximum headroom
6’ 1”1.86 m

Nauticat 37's aft cabin

Maximum headroom
6’1.82 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Nordship 40 DS (Nordship Yachts)
2005
40’12.2 m
Hallberg-Rassy 39 MkI (Hallberg-Rassy)
1991
40’ 1”12.22 m
Nordship 360 DS (Nordship Yachts)
2009
36’ 1”11 m
Nordship 380 DS (Nordship Yachts)
2007
38’ 1”11.6 m
Oyster Heritage 37 (Oyster)
1984
37’11.28 m
Moody 36 - Primrose (Moody)
1977
36’10.97 m
Hallberg-Rassy 31 MkI (Hallberg-Rassy)
1992
31’ 7”9.62 m
Impression 35 (Elan Yachts)
2014
32’ 10”9.99 m
Hallberg-Rassy 352 (Hallberg-Rassy)
1978
34’ 7”10.54 m
Nauticat 351 (Nauticat Yachts)
2006
34’ 10”10.6 m
Southerly 35 RS (Northshore)
2007
35’ 6”10.82 m
Hallberg-Rassy 36 MkII (Hallberg-Rassy)
1994
37’ 1”11.31 m
Gin Fizz (Jeanneau)
1974
37’ 5”11.4 m
Nauticat 385 (Nauticat Yachts)
2006
38’ 2”11.65 m
Sharki (Amel)
1979
39’ 2”11.95 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more