JPK 1180's main features
Model
JPK 1180
Hull type
Monohull
Category
Offshore racer-cruiser sailboat
Sailboat builder
Sailboat designer
Country
France
Construction
GRP (glass reinforced polyester):
Sandwich Airex fiberglass vinylester (vacuum infusion)
First built hull
2018
Last built hull
Still in production
Appendages
Keel : fin without bulb
Helm
Single tiller
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
EC design category
iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5mA
Standard public price ex. VAT (indicative only)
JPK 1180's main dimensions
Hull length
38’ 7”11.78 m
Waterline length
33’ 6”10.2 m
Beam (width)
13’3.95 m
Draft
7’ 8”2.34 m
Light displacement (MLC)
13007 lb5900 kg
Ballast weight
5842 lb2650 kg
Ballast type
Cast iron / lead fin
JPK 1180's rig and sails
Upwind sail area
958 ft²89 m²
Downwind sail area
2013 ft²187 m²
Mainsail area
527 ft²49 m²
Genoa area
431 ft²40 m²
Symmetric spinnaker area
1485 ft²138 m²
Asymmetric spinnaker area
1485 ft²138 m²
Rigging type
Sloop Marconi fractional
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Carbon fiber mast and aluminum boom
Standing rigging
Single-strand (ROD) discontinuous
JPK 1180's performances
Upwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.293 ft²/T27.26 m²/T
Downwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.616 ft²/T57.27 m²/T
Displacement-length ratio (DLR)
iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.157
Ballast ratio
iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.45 %
Critical hull speed
iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.7.75 knots
JPK 1180's auxiliary engine
Engine(s)
1 inboard engine
Engine(s) power (min./max.)
30 HP / 40 HP
Fuel type
Diesel
Fuel tank capacity
13.2 gal50 liters
JPK 1180's accommodations and layout
Cockpit
Open aft cockpit
Cabin(s)
2
Berth(s) (min./max.)
4 / 6
Head(s)
1
Freshwater tank capacity
31.7 gal120 liters
Head headroom
6’ 5”1.94 m
JPK 1180's fore cabin
Berth length
6’ 7”2 m
Berth width
4’ 11”1.5 m
JPK 1180's aft cabin
Berth length
6’ 5”1.95 m
Berth width
4’ 11”1.5 m
Have you spotted incorrect data?
You can report it in the forum or
contact the webmaster