Sun Odyssey 419 Deep draft

Sailboat specifications

The Sun Odyssey 419 is a 39’4” (11.98m) cruising sailboat designed by Philippe Briand (France). She was built between 2015 and 2019 by Jeanneau (France). The Deep draft version offers a deeper L-shaped keel bringing extra performance especially upwind.

The Sun Odyssey 419 has also been marketed as Sun Odyssey 409 and she is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Sun Odyssey 419's main features

Model: Sun Odyssey 419
Version: Deep draft
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Jeanneau
Sailboat designer: Philippe Briand
Sailboat range: Sun Odyssey
Country: France
Construction: Hull and deck: GRP (glass reinforced polyester)
Number of hulls built: About 300
First built hull: 2015
Last built hull: 2019
Appendages: Keel : L-shaped keel (with bulb)
Helm: Twin helm wheels
Rudder: Single spade rudder
Unsinkable: No
Trailerable: No
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions) A: Wind < force 9, Waves < 10m B: Wind < force 8, Waves < 8m C: Wind < force 6, Waves < 4m D: Wind < force 4, Waves < 0,5m: A
Standard public price ex. VAT (indicative only): N/A €

Sun Odyssey 419's main dimensions

Overall length: 40’ 6”12.34 m
Hull length: 39’ 4”11.98 m
Waterline length: 36’ 1”11 m
Beam (width): 13’ 1”3.99 m
Draft: 6’ 11”2.1 m
Mast height from D_WL: 60’ 5”18.42 m
Light displacement (M_LC): 17328 lb7860 kg
Ballast weight: 4982 lb2260 kg
Ballast type: Cast iron

Sun Odyssey 419's rig and sails

Upwind sail area: 964 ft²89.6 m²
Downwind sail area: 1738 ft²161.5 m²
Mainsail area: 468 ft²43.5 m²
Genoa area: 496 ft²46.1 m²
Solent area: 350 ft²32.5 m²
Jib area: 304 ft²28.2 m²
Symmetric spinnaker area: 1270 ft²118 m²
Asymmetric spinnaker area: 1173 ft²109 m²
Code 0 area: 753 ft²70 m²
I iFore triangle height (from mast foot to fore stay top attachment): 50’ 11”15.5 m
J iFore triangle base (from mast foot to bottom of forestay): 14’ 10”4.52 m
P iMainsail hoist measurement (from tack to head): 49’ 2”15 m
E iMainsail foot measurement (from tack to clew): 16’ 1”4.9 m
Rigging type: Sloop Marconi 9/10
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 2
Spreaders angle: Swept-back
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire

Sun Odyssey 419's performances

Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 244 ft²/T22.67 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 440 ft²/T40.85 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 167
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 29 %
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 8.05 knots