Sun Odyssey 29.2 Deep draft

Sailboat specifications

The Sun Odyssey 29.2 is a 27’11” (8.5m) cruising sailboat designed by Groupe Fauroux (France). She was built between 1997 and 2008 by Jeanneau (France) with 832 hulls completed. The Deep draft version offers a deeper L-shaped keel bringing extra performance especially upwind.

The Sun Odyssey 29.2 is as well listed, on Boat-Specs.com, in Keel and centerboard version (see all the versions compared).

Sun Odyssey 29.2's main features

Model: Sun Odyssey 29.2
Version: Deep draft
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Jeanneau
Sailboat designer: Groupe Fauroux
Sailboat range: Sun Odyssey
Country: France
Construction: GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built: 832
First built hull: 1997
Last built hull: 2008
Appendages: Keel : L-shaped keel (with bulb)
Helm: Single tiller
Rudder: Single spade rudder
Unsinkable: No
Trailerable: No
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions) A: Wind < force 9, Waves < 10m B: Wind < force 8, Waves < 8m C: Wind < force 6, Waves < 4m D: Wind < force 4, Waves < 0,5m: B
Standard public price ex. VAT (indicative only): N/A €

Sun Odyssey 29.2's main dimensions

Overall length: 28’ 11”8.8 m
Hull length: 27’ 11”8.5 m
Waterline length: 25’ 4”7.7 m
Beam (width): 9’ 10”2.98 m
Draft: 4’ 7”1.4 m
Mast height from D_WL: 43’ 4”13.2 m
Light displacement (M_LC): 6063 lb2750 kg
Ballast weight: 2227 lb1010 kg
Ballast type: Cast iron

Sun Odyssey 29.2's rig and sails

Upwind sail area: 431 ft²40 m²
Downwind sail area: 786 ft²73 m²
Mainsail area: 215 ft²20 m²
Genoa area: 215 ft²20 m²
Symmetric spinnaker area: 570 ft²53 m²
I iFore triangle height (from mast foot to fore stay top attachment): 34’ 1”10.4 m
J iFore triangle base (from mast foot to bottom of forestay): 10’ 2”3.12 m
P iMainsail hoist measurement (from tack to head): 33’ 10”10.3 m
E iMainsail foot measurement (from tack to clew): 11’3.35 m
Rigging type: Sloop Marconi fractional
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 1
Spreaders angle: Swept-back
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire continuous

Sun Odyssey 29.2's performances

Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 219 ft²/T20.38 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 400 ft²/T37.19 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 171
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 37 %
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 6.74 knots