Sun Dream 28 Keel and centerboard

Sailboat specifications

The Sun Dream 28 is a 27’1” (8.25m) cruising sailboat designed by Tony Castro Yacht Design (Argentina). She was built between 1987 and 1991 by Jeanneau (France) with 407 hulls completed. The Keel and centerboard version features a centerboard inside of a short fin-keel allowing shoal draft while maintaining upwind capabilities.

The Sun Dream 28 is as well listed, on Boat-Specs.com, in Fin keel version (see all the versions compared).

Sun Dream 28's main features

Model: Sun Dream 28
Version: Keel and centerboard
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Jeanneau
Sailboat designer: Tony Castro Yacht Design
Country: France
Construction: GRP (glass reinforced polyester):
Single skin fiberglass polyester
Number of hulls built: 407
First built hull: 1987
Last built hull: 1991
Appendages: Centerboard : pivoting centerboard in the keel
Helm: Single tiller
Rudder: Single transom hung rudder
Unsinkable: No
Trailerable: No
Former French navigation category: 2
Standard public price ex. VAT (indicative only): N/A €

Sun Dream 28's main dimensions

Overall length: 29’ 6”9 m
Hull length: 27’ 1”8.25 m
Waterline length: 24’ 6”7.46 m
Beam (width): 10’ 4”3.15 m
Draft: 6’ 2”1.9 m
Draft when appendages up: 3’ 4”1 m
Mast height from D_WL: 41’ 5”12.62 m
Light displacement (M_LC): 6393 lb2900 kg
Ballast weight: 2800 lb1270 kg
Ballast type: Cast iron exterior ballast with steel centerboard
French customs tonnage: 7.06 Tx

Sun Dream 28's rig and sails

Upwind sail area: 484 ft²44.93 m²
Downwind sail area: 868 ft²80.6 m²
Mainsail area: 184 ft²17.1 m²
Genoa area: 300 ft²27.83 m²
Solent area: 249 ft²23.09 m²
Jib area: 157 ft²14.6 m²
Stormjib area: 53 ft²4.9 m²
Symmetric spinnaker area: 684 ft²63.5 m²
I iFore triangle height (from mast foot to fore stay top attachment): 35’ 4”10.75 m
J iFore triangle base (from mast foot to bottom of forestay): 11’ 8”3.57 m
P iMainsail hoist measurement (from tack to head): 30’ 2”9.2 m
E iMainsail foot measurement (from tack to clew): 10’ 10”3.3 m
Rigging type: Sloop Marconi masthead
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 1
Spreaders angle: Swept-back
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire continuous

Sun Dream 28's performances

HN (French rating) iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.: 15.0
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 238 ft²/T22.09 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 427 ft²/T39.63 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 198
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 44 %
Wetted area: 184 ft²17.06 m²
Righting moment @ 1° iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle. Higher the righting moment is for an angle, greater is the stability.: 454 lb.ft63 kg.m
Maximum transverse section: 10 ft²0.94 m²
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 6.63 knots