Sangria Standard

Sailboat specifications

The Sangria is a 25’ (7.62m) cruising sailboat designed by Philippe Harlé (France). She was built between 1969 and 1982 by Jeanneau (France) and Gibert Marine (France) with 2156 hulls completed.

The Sangria is as well listed, on Boat-Specs.com, in Deep draft version (see all the versions compared).

Sangria's main features

Model: Sangria
Version: Standard
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Jeanneau
&
Gibert Marine
Sailboat designer: Philippe Harlé
Country: France
Construction: GRP (glass reinforced polyester):
Single skin fiberglass polyester
Number of hulls built: 2156
First built hull: 1969
Last built hull: 1982
Appendages: Keel : fin without bulb
Helm: Single tiller
Rudder: Single semi-spade rudder
Unsinkable: No
Trailerable: No
Former French navigation category: 3
Standard public price ex. VAT (indicative only): N/A €

Sangria's main dimensions

Hull length: 25’7.62 m
Waterline length: 19’5.8 m
Beam (width): 8’ 11”2.7 m
Waterline beam (width): 7’ 1”2.16 m
Draft: 4’ 1”1.25 m
Mast height from D_WL: 34’ 6”10.51 m
Fore freeboard: 3’ 2”0.98 m
Mid-ship freeboard: 2’ 11”0.89 m
Light displacement (M_LC): 3748 lb1700 kg
Maximum displacement (M_LDC): 4497 lb2040 kg
Ballast weight: 1742 lb790 kg
Ballast type: Cast iron
French customs tonnage: 6.24 Tx

Sangria's rig and sails

Upwind sail area: 339 ft²31.5 m²
Downwind sail area: 570 ft²53 m²
Mainsail area: 135 ft²12.5 m²
Genoa area: 205 ft²19 m²
Solent area: 161 ft²15 m²
Jib area: 108 ft²10 m²
Stormjib area: 54 ft²5 m²
Symmetric spinnaker area: 436 ft²40.5 m²
I iFore triangle height (from mast foot to fore stay top attachment): 28’ 8”8.76 m
J iFore triangle base (from mast foot to bottom of forestay): 10’ 2”3.1 m
P iMainsail hoist measurement (from tack to head): 22’ 7”6.9 m
E iMainsail foot measurement (from tack to clew): 8’ 8”2.64 m
Rigging type: Sloop Marconi masthead
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 1
Spreaders angle: 0 °
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire continuous

Sangria's performances

IOR rating iIOR, or International Offshore Rule, was a measurement rule system used internationally for ocean racing. It allows boats of different sizes and designs to race each other fairly. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.: 18.0
HN (French rating) iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.: 9.5
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 238 ft²/T22.11 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 401 ft²/T37.21 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 247
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 46 %
Wetted area: 142 ft²13.22 m²
Maximum transverse section: 8 ft²0.7 m²
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 5.85 knots