Fantasia 27 Fin keel

Sailboat specifications

The Fantasia 27 is a 25’4” (7.7m) cruising sailboat designed by Philippe Harlé (France). She was built between 1982 and 1991 by Jeanneau (France) with 1743 hulls completed. The Fin keel version adopts a classical fin configuration, the easiest option to provide a low center of gravity.

The Fantasia 27 is as well listed, on Boat-Specs.com, in Twin keel and Keel and centerboard version (see all the versions compared).

Fantasia 27's main features

Model: Fantasia 27
Version: Fin keel
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Jeanneau
Sailboat designer: Philippe Harlé
Country: France
Construction: GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
Number of hulls built: 1743
First built hull: 1982
Last built hull: 1991
Appendages: Keel : fin without bulb
Helm: Single tiller
Rudder: Single transom hung rudder
Unsinkable: No
Trailerable: No
Former French navigation category: 2
Standard public price ex. VAT (indicative only): N/A €

Fantasia 27's main dimensions

Overall length: 27’ 2”8.3 m
Hull length: 25’ 4”7.7 m
Waterline length: 21’ 6”6.56 m
Beam (width): 9’ 5”2.88 m
Draft: 4’ 11”1.5 m
Light displacement (M_LC): 5291 lb2400 kg
Ballast weight: 1653 lb750 kg
Ballast type: Cast iron
French customs tonnage: 6.11 Tx

Fantasia 27's rig and sails

Upwind sail area: 379 ft²35.2 m²
Downwind sail area: 656 ft²60.9 m²
Mainsail area: 138 ft²12.8 m²
Genoa area: 241 ft²22.4 m²
Solent area: 203 ft²18.9 m²
Jib area: 115 ft²10.7 m²
Stormjib area: 48 ft²4.5 m²
Symmetric spinnaker area: 518 ft²48.1 m²
I iFore triangle height (from mast foot to fore stay top attachment): 31’ 10”9.7 m
J iFore triangle base (from mast foot to bottom of forestay): 9’ 10”3 m
P iMainsail hoist measurement (from tack to head): 26’ 7”8.1 m
E iMainsail foot measurement (from tack to clew): 9’ 2”2.8 m
Rigging type: Sloop Marconi masthead
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 1
Spreaders angle: No spreader
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire continuous

Fantasia 27's performances

Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 211 ft²/T19.64 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 366 ft²/T33.97 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 241
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 31 %
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 6.22 knots