Ice 62 Lifting keel
Sailboat specifications
The Ice 62 is a 61’10” (18.83m) cruiser-racer sailboat designed by Felci Yachts (Italy). She is built since 2014 by Ice Yachts (Italy). The Lifting keel version features an appendage configuration without compromise between draft and performance. Only drawback: some space is taken inside by the keel.
Ice 62's main features
Model
Ice 62
Version
Lifting keel
Hull type
Monohull
Category
Cruiser-racer sailboat
Sailboat builder
Sailboat designer
Country
Italy
Construction
Carbon fiber reinforced epoxy:
- Hull: Sandwich PVC carbon fiber epoxy (vacuum infusion)
- Deck: Sandwich PVC carbon fiber epoxy (vacuum infusion)
First built hull
2014
Last built hull
Still in production
Appendages
Lifting keel : fin with bulb, lifting
Helm
Twin helm wheels
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5mA
Standard public price ex. VAT (indicative only)
Ice 62's main dimensions
Hull length
61’ 10”18.83 m
Waterline length
55’ 2”16.84 m
Beam (width)
17’ 1”5.2 m
Draft
13’ 1”4 m
Draft when appendages up
8’ 2”2.5 m
Light displacement (MLC)
37479 lb17000 kg
Ballast weight
11023 lb5000 kg
Ballast type
Steel fin with lead bulb
Ice 62's rig and sails
Upwind sail area
2325 ft²216 m²
Downwind sail area
4908 ft²456 m²
Mainsail area
1356 ft²126 m²
Genoa area
969 ft²90 m²
Asymmetric spinnaker area
3552 ft²330 m²
I
iFore triangle height (from mast foot to fore stay top attachment)81’24.7 m
J
iFore triangle base (from mast foot to bottom of forestay)21’ 6”6.56 m
P
iMainsail hoist measurement (from tack to head)79’ 8”24.3 m
E
iMainsail foot measurement (from tack to clew)20’ 8”6.3 m
Rigging type
Sloop Marconi 9/10
Mast configuration
Keel stepped mast
Rotating spars
No
Number of levels of spreaders
3
Spreaders angle
Swept-back
Spars construction
Carbon fiber spars
Ice 62's performances
Upwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.352 ft²/T32.67 m²/T
Downwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.742 ft²/T68.97 m²/T
Displacement-length ratio (DLR)
iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.101
Ballast ratio
iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.29 %
Critical hull speed
iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.9.96 knots
Ice 62's auxiliary engine
Engine(s)
1 inboard engine
Engine(s) power (min./max.)
/ 150 HP
Fuel type
Diesel
Fuel tank capacity
184.9 gal700 liters
Ice 62's accommodations and layout
Cockpit
Open aft cockpit
Cabin(s) (min./max.)
3 / 4
Berth(s) (min./max.)
6 / 8
Head(s) (min./max.)
/ 3
Freshwater tank capacity
211.3 gal800 liters
Have you spotted incorrect data?
You can report it in the forum or
contact the webmasterSimilar sailboats that may interest you:
Sailboats
First built hull
Hull length
2012
63’19.2 m
2010
63’ 1”19.22 m
1992
62’18.89 m
2005
55’16.76 m
1995
60’18.29 m
2016
63’19.19 m
2008
66’20.12 m
2008
66’20.12 m
2009
61’ 11”18.86 m
2009
61’ 11”18.86 m
2017
60’18.3 m
2018
55’ 1”16.8 m
2017
70’ 11”21.6 m
2019
51’ 10”15.8 m
2019
52’ 5”15.98 m