Elan 410 Deep draft

Sailboat specifications

The Elan 410 is a 40’4” (12.27m) cruiser-racer sailboat designed by Humphreys Yacht Design (United Kingdom). She was built between 2007 and 2012 by Elan Yachts (Slovenia). The Deep draft version offers a deeper L-shaped keel bringing extra performance especially upwind.

The Elan 410 is as well listed, on Boat-Specs.com, in Standard version (see all the versions compared).

Elan 410's main features

Model: Elan 410
Version: Deep draft
Hull type: Monohull
Category: Offshore cruiser-racer sailboat
Sailboat builder: Elan Yachts
Sailboat designer: Humphreys Yacht Design
Country: Slovenia
Construction: Hull and deck: GRP (glass reinforced polyester)
First built hull: 2007
Last built hull: 2012
Appendages: Keel : L-shaped keel (with bulb)
Helm: Single helm wheel
Rudder: Single spade rudder
Unsinkable: No
Trailerable: No
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions) A: Wind < force 9, Waves < 10m B: Wind < force 8, Waves < 8m C: Wind < force 6, Waves < 4m D: Wind < force 4, Waves < 0,5m: A
Standard public price ex. VAT (indicative only): N/A €

Elan 410's main dimensions

Overall length: 40’ 4”12.27 m
Hull length: 40’ 4”12.27 m
Waterline length: 37’11.28 m
Beam (width): 12’ 10”3.91 m
Draft: 8’2.45 m
Light displacement (M_LC): 18298 lb8300 kg
Ballast weight: 5443 lb2469 kg

Elan 410's rig and sails

Upwind sail area: 988 ft²91.75 m²
Downwind sail area: 2216 ft²205.83 m²
Mainsail area: 543 ft²50.47 m²
Genoa area: 444 ft²41.28 m²
Symmetric spinnaker area: 1392 ft²129.35 m²
Gennaker area: 1672 ft²155.36 m²
I iFore triangle height (from mast foot to fore stay top attachment): 54’ 8”16.66 m
J iFore triangle base (from mast foot to bottom of forestay): 15’ 2”4.63 m
P iMainsail hoist measurement (from tack to head): 53’16.16 m
E iMainsail foot measurement (from tack to clew): 17’ 10”5.43 m
Rigging type: Sloop Marconi fractional
Mast configuration: Keel stepped mast
Rotating spars: No
Number of levels of spreaders: 2
Spreaders angle: Swept-back
Spars construction: Aluminum spars

Elan 410's performances

Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 241 ft²/T22.38 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 540 ft²/T50.21 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 164
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 30 %
Righting moment @ 30° iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle. Higher the righting moment is for an angle, greater is the stability.: 28209 lb.ft3900 kg.m
Maximum righting moment iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle. Higher the righting moment is for an angle, greater is the stability.: 37250 lb.ft5150 kg.m @ 55.00 °
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 8.15 knots

Elan 410's auxiliary engine

Engine(s): 1 inboard engine
Engine(s) power: 40 HP
Fuel type: Diesel
Fuel tank capacity: 38.3 gal145 liters

Elan 410's accommodations and layout

Cockpit: Closed aft cockpit
Cabin(s): 3
Berth(s) (min./max.): 6 / 8
Head(s) (min./max.): 1 / 2
Freshwater tank capacity: 93.8 gal355 liters

Have you spotted incorrect data? You can report it in the forum or contact the webmaster

Elan Yachts Elan 410 Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 - - 1/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 layout Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 layout - - 2/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 3/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 4/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 5/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 6/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 7/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 8/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 sailing - - 9/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations - - 10/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations - - 11/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations - - 12/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations - - 13/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations - - 14/15
Picture extracted from the commercial documentation © Elan Yachts

Elan Yachts Elan 410 interior and accommodations - - 15/15
Picture extracted from the commercial documentation © Elan Yachts

Similar sailboats that may interest you:

Sailboats

First built hull

Hull length

Salona 41 Deep draft (AD Boats)

2010

41’12.5 m

First 40 Deep draft (Bénéteau)

2008

40’ 2”12.24 m

Grand Soleil 43 - B&C Deep draft (Cantiere Del Pardo)

2006

42’ 6”12.95 m

J/121 (J/Boats)

2017

40’12.2 m

Elan E5 Deep draft (Elan Yachts)

2015

39’ 2”11.96 m

Elan E6 Deep draft (Elan Yachts)

2017

44’ 7”13.6 m

First 42s7 Lead keel (Bénéteau)

1994

41’ 8”12.7 m

Arcona 410 Standard (Arcona Yachts)

2011

40’12.2 m

Arcona 430 Deep draft (Arcona Yachts)

2008

43’ 1”13.15 m

First 40.7 Deep draft (Bénéteau)

1997

39’ 1”11.92 m

Sun Fast 42 Standard (Jeanneau)

1996

40’ 10”12.45 m

Salona 37 Deep draft (AD Boats)

2006

37’11.29 m

Elan 380 Deep draft (Elan Yachts)

2008

37’ 2”11.34 m

Salona 38 Deep draft (AD Boats)

2011

37’ 8”11.5 m

Elan 410 Standard (Elan Yachts)

2007

40’ 4”12.27 m