Sense 57 Deep draft
Sailboat specifications
The
Sense 57 is a 55’1” (16.8m) cruising sailboat designed by
Berret Racoupeau Yachts Design (France). She was built between 2016 and 2018 by
Bénéteau (France). The
Deep draft version offers a deeper L-shaped keel bringing extra performance especially upwind.
The
Sense 57 is as well listed, on Boat-Specs.com, in
Shoal draft version (
see all the versions compared).
Sense 57's main features
Model
Sense 57
Version
Deep draft
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Sailboat designer
Sailboat range
Country
France
Construction
GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
First built hull
2016
Last built hull
2018
Appendages
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Rudder
Twin spade rudders
Unsinkable
No
Trailerable
No
EC design category
iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5mA
Standard public price ex. VAT (indicative only)
Sense 57's main dimensions
Overall length
58’ 4”17.78 m
Hull length
55’ 1”16.8 m
Waterline length
52’ 4”15.93 m
Beam (width)
16’ 4”4.97 m
Draft
7’ 11”2.4 m
Mast height from DWL
78’ 5”23.91 m
Light displacement (MLC)
41403 lb18780 kg
Ballast weight
10803 lb4900 kg
Ballast type
Cast iron
Sense 57's rig and sails
Upwind sail area
1641 ft²152.5 m²
Downwind sail area
3039 ft²282.3 m²
Mainsail area
797 ft²74 m²
Genoa area
845 ft²78.5 m²
Jib area
635 ft²59 m²
Staysail area
366 ft²34 m²
Asymmetric spinnaker area
2242 ft²208.3 m²
Code 0 area
1238 ft²115 m²
I
iFore triangle height (from mast foot to fore stay top attachment)69’ 8”21.25 m
J
iFore triangle base (from mast foot to bottom of forestay)24’7.31 m
P
iMainsail hoist measurement (from tack to head)66’ 4”20.2 m
E
iMainsail foot measurement (from tack to clew)20’ 10”6.35 m
Rigging type
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire
Sense 57's performances
Upwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.232 ft²/T21.58 m²/T
Downwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.430 ft²/T39.96 m²/T
Displacement-length ratio (DLR)
iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.132
Ballast ratio
iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.26 %
Critical hull speed
iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.9.69 knots
Sense 57's auxiliary engine
Engine(s)
1 inboard engine
Engine(s) power (min./max.)
80 HP / 110 HP
Fuel type
Diesel
Fuel tank capacity
109.6 gal415 liters
Sense 57's accommodations and layout
Cockpit
Closing aft cockpit with opening system
Cabin(s) (min./max.)
3 / 4
Berth(s) (min./max.)
6 / 8
Head(s)
3
Freshwater tank capacity
169.1 gal640 liters
Holding tank capacity
21.1 gal80 liters
Fridge/ice-box capacity
79.3 gal300 liters
Boiler capacity
10.6 gal40 liters
Maximum headroom
6’ 7”2 m
Galley headroom
6’ 6”1.97 m
Sense 57's saloon
Maximum headroom
6’ 6”1.98 m
Sense 57's fore cabin
Maximum headroom
6’ 5”1.94 m
Berth length
6’ 8”2.03 m
Berth width (head/feet)
5’ 7”1.7 m / 4’1.21 m
Sense 57's aft cabin
Maximum headroom
6’ 6”1.97 m
Berth length
6’ 7”2 m
Berth width (head/feet)
5’ 1”1.56 m / 3’ 4”1 m
Have you spotted incorrect data?
You can report it in the forum or
contact the webmasterSimilar sailboats that may interest you:
Sailboats
First built hull
Hull length
2010
49’ 1”14.98 m
2012
52’ 6”15.99 m
1988
52’ 6”16 m
2011
55’ 1”16.8 m
2014
56’ 1”17.1 m
2010
63’ 1”19.22 m
2015
58’ 2”17.75 m
2016
53’ 6”16.3 m
2016
49’ 1”14.98 m
2016
55’ 1”16.8 m
2000
52’ 6”16 m
2017
50’ 11”15.51 m
2017
52’ 6”15.99 m
2017
49’ 1”14.98 m
2017
58’ 1”17.7 m