Sense 50 Shoal draft

Sailboat specifications

The Sense 50 is a 49’1” (14.98m) cruising sailboat designed by Berret Racoupeau Yachts Design (France). She was built between 2010 and 2016 by Bénéteau (France). The Shoal draft version features a shorter keel to grant access to shallow areas.

The Sense 50 is as well listed, on Boat-Specs.com, in Deep draft version (see all the versions compared).

Sense 50's main features

Model: Sense 50
Version: Shoal draft
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Bénéteau
Sailboat designer: Berret Racoupeau Yachts Design
Sailboat range: Sense
Country: France
Construction: GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich balsa fiberglass polyester
Number of hulls built: About 70
First built hull: 2010
Last built hull: 2016
Appendages: Keel : L-shaped keel (with bulb)
Helm: Twin helm wheels
Rudder: Twin spade rudders
Unsinkable: No
Trailerable: No
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions) A: Wind < force 9, Waves < 10m B: Wind < force 8, Waves < 8m C: Wind < force 6, Waves < 4m D: Wind < force 4, Waves < 0,5m: A
Standard public price ex. VAT (indicative only): N/A €

Sense 50's main dimensions

Overall length: 50’ 1”15.27 m
Hull length: 49’ 1”14.98 m
Waterline length: 46’ 1”14.05 m
Beam (width): 15’ 11”4.86 m
Draft: 6’ 1”1.85 m
Mast height from D_WL: 74’ 2”22.62 m
Light displacement (M_LC): 34789 lb15780 kg
Ballast weight: 9811 lb4450 kg
Ballast type: Cast iron

Sense 50's rig and sails

Upwind sail area: 1324 ft²123 m²
Downwind sail area: 2669 ft²248 m²
Mainsail area: 678 ft²63 m²
Genoa area: 646 ft²60 m²
Asymmetric spinnaker area: 1991 ft²185 m²
I iFore triangle height (from mast foot to fore stay top attachment): 65’ 7”20 m
J iFore triangle base (from mast foot to bottom of forestay): 20’ 2”6.15 m
P iMainsail hoist measurement (from tack to head): 62’18.9 m
E iMainsail foot measurement (from tack to clew): 19’ 6”5.95 m
Rigging type: Sloop Marconi masthead
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 2
Spreaders angle: Swept-back
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire

Sense 50's performances

Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 210 ft²/T19.55 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 424 ft²/T39.42 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 161
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 28 %
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 9.10 knots