Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Bavaria Cruiser 41 Standard

Sailboat specifications

The Bavaria Cruiser 41 is a 39’4” (11.99m) cruising sailboat designed by Farr Yacht Design (United States). She is built since 2011 by Bavaria Yachts (Germany).

The Bavaria Cruiser 41 is as well listed, on Boat-Specs.com, in Shoal draft version (see all the versions compared).

Bavaria Cruiser 41's main features

Model
Bavaria Cruiser 41
Version
Standard
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Country
Germany
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2011
Last built hull
Still in production
Appendages
Keel : L-shaped keel (with bulb)
Helm
Twin helm wheels
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
Standard public price ex. VAT (indicative only)
About 
148 000 €
 (2020)

Bavaria Cruiser 41's main dimensions

Overall length
40’ 6”12.35 m
Hull length
39’ 4”11.99 m
Waterline length
35’ 1”10.69 m
Beam (width)
13’3.96 m
Draft
6’ 8”2.05 m
Mast height from DWL
61’ 4”18.68 m
Light displacement (MLC)
19136 lb8680 kg
Ballast weight
6032 lb2736 kg
Ballast type
Cast iron

Bavaria Cruiser 41's rig and sails

Upwind sail area
883 ft²82 m²
Mainsail area
517 ft²48 m²
Genoa area
366 ft²34 m²
I
 iFore triangle height (from mast foot to fore stay top attachment)
51’ 10”15.8 m
J
 iFore triangle base (from mast foot to bottom of forestay)
13’ 10”4.2 m
P
 iMainsail hoist measurement (from tack to head)
50’ 6”15.4 m
E
 iMainsail foot measurement (from tack to clew)
17’ 5”5.3 m
Rigging type
Sloop Marconi 9/10
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire

Bavaria Cruiser 41's performances

Upwind sail area to displacement
 iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
209 ft²/T19.41 m²/T
Displacement-length ratio (DLR)
 iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:

a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
201
Ballast ratio
 iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

The higher the ballast ratio is, the greater is the stability.
32 %
Critical hull speed
 iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
7.94 knots

Bavaria Cruiser 41's auxiliary engine

Engine(s)
1 inboard engine
Engine(s) power
28 HP
Fuel type
Diesel
Fuel tank capacity
55.5 gal210 liters

Bavaria Cruiser 41's accommodations and layout

Cockpit
Closing aft cockpit with opening system
Cabin(s) (min./max.)
2 / 3
Berth(s) (min./max.)
4 / 8
Head(s) (min./max.)
1 / 2
Freshwater tank capacity
55.5 gal210 liters

Bavaria Cruiser 41's saloon

Maximum headroom
6’ 5”1.94 m
Have you spotted incorrect data?  You can report it in the forum or contact the webmaster

Similar sailboats that may interest you:


Sailboats
First built hull
Hull length
Bavaria Cruiser 45 Standard (Bavaria Yachts)
2010
44’ 7”13.6 m
Bavaria Cruiser 46 Standard (Bavaria Yachts)
2014
44’ 7”13.6 m
Vision 42 Standard (Bavaria Yachts)
2012
41’12.5 m
Bavaria Cruiser 37 Standard (Bavaria Yachts)
2014
35’ 10”10.9 m
Bavaria Cruiser 41 Shoal draft (Bavaria Yachts)
2011
39’ 4”11.99 m
Amel 50 (Amel)
2017
50’ 11”15.51 m
Dufour 390 Grand Large Standard (Dufour)
2018
36’ 8”11.19 m
Dufour 430 Standard (Dufour)
2019
41’12.5 m
Impression 40.1 Standard (Elan Yachts)
2019
37’ 8”11.48 m
Bavaria Cruiser 36 Standard (Bavaria Yachts)
2010
35’ 10”10.9 m
Dufour 382 Grand Large Standard (Dufour)
2014
36’10.96 m
Hallberg-Rassy 372 Standard (Hallberg-Rassy)
2010
37’ 2”11.35 m
Sun Odyssey 39 DS Standard (Jeanneau)
2006
38’ 1”11.62 m
Sun Odyssey 40 DS Standard (Jeanneau)
1997
38’ 6”11.75 m
Bavaria 40 Cruiser - Farr Standard (Bavaria Yachts)
2010
39’ 4”11.99 m
Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

Read more