Main features | Sun Shine 38 Team / Fin keel |
Model | Sun Shine 38 |
Version | Team / Fin keel |
Hull type | Monohull |
Category | Cruising sailboat |
Sailboat builder | Jeanneau |
Sailboat designer | |
Country | France |
Construction | GRP (glass reinforced polyester): - Hull: Single skin fiberglass (Kevlar optional) polyester - Deck: Sandwich balsa fiberglass polyester |
Number of hulls built | About 750 |
First built hull | 1982 |
Last built hull | 1989 |
Appendages | Keel : fin without bulb |
Helm | Single tiller (helm wheel in option) |
Rudder | Single semi-spade rudder |
Unsinkable | No |
Trailerable | No |
Former French navigation category | 1 |
Main dimensions | Sun Shine 38 Team / Fin keel |
Overall length | 36’ 8”11.2 m |
Hull length | 36’ 8”11.2 m |
Waterline length | 30’ 8”9.35 m |
Beam (width) | 12’ 7”3.85 m |
Draft | 6’ 2”1.9 m |
Mast height from DWL | 55’ 1”16.8 m |
Light displacement (MLC) | 11905 lb5400 kg |
Ballast weight | 5027 lb2280 kg |
Ballast type | Cast iron |
French customs tonnage | 12.16 Tx |
Rig and sails | Sun Shine 38 Team / Fin keel |
Upwind sail area | 818 ft²76 m² |
Downwind sail area | 1453 ft²135 m² |
Mainsail area | 301 ft²28 m² |
Genoa area | 517 ft²48 m² |
Solent area | 409 ft²38 m² |
Jib area | 215 ft²20 m² |
Symmetric spinnaker area | 1152 ft²107 m² |
J iFore triangle base (from mast foot to bottom of forestay) | 13’ 6”4.12 m |
P iMainsail hoist measurement (from tack to head) | 40’12.19 m |
E iMainsail foot measurement (from tack to clew) | 13’ 6”4.11 m |
Rigging type | Sloop Marconi masthead |
Mast configuration | Deck stepped mast |
Rotating spars | No |
Number of levels of spreaders | 2 |
Spreaders angle | 0 ° |
Spars construction | Aluminum spars |
Standing rigging | 1x19 strand wire |
Performances | Sun Shine 38 Team / Fin keel |
HN (French rating) iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats. | 22.0 |
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat. | 266 ft²/T24.69 m²/T |
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. | 472 ft²/T43.86 m²/T |
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat. | 187 |
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.The higher the ballast ratio is, the greater is the stability. | 42 % |
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34. | 7.42 knots |
Auxiliary engine | Sun Shine 38 Team / Fin keel |
Engine(s) | 1 inboard engine |
Engine(s) power | 30 HP |
Fuel type | Diesel |
Fuel tank capacity | 22.5 gal85 liters |
Accommodations and layout | Sun Shine 38 Team / Fin keel |
Cockpit | Closed aft cockpit |
Cabin(s) (min./max.) | 2 / 3 |
Berth(s) (min./max.) | 6 / 10 |
Head(s) | 1 |
Freshwater tank capacity | 52.8 gal200 liters |
Fridge/ice-box capacity | 26.4 gal100 liters |
Boiler capacity | 11.4 gal43 liters |
Maximum headroom | 6’ 1”1.86 m |
Galley headroom | 5’ 11”1.8 m |
Head headroom | 5’ 8”1.75 m |
Saloon | Sun Shine 38 Team / Fin keel |
Maximum headroom | 6’1.83 m |
Saloon table length | 3’ 7”1.1 m |
Saloon table width | 3’ 4”1 m |
Fore cabin | Sun Shine 38 Team / Fin keel |
Maximum headroom | 5’ 8”1.75 m |
Berth length | 6’ 7”2 m |
Berth width | 5’ 6”1.68 m |
Aft cabin | Sun Shine 38 Team / Fin keel |
Maximum headroom | 5’ 11”1.8 m |
Berth length | 6’ 5”1.95 m |
Berth width | 4’ 11”1.5 m |