Detailed sailboat specifications and datasheets since 2015
MetricSI (m)
Imperial & Metricboth
ImperialIMP (ft)

Contest 42CS (Standard)

Main featuresContest 42CS Standard
Model
Contest 42CS
Version
Standard
Hull type
Monohull
Category
Offshore cruising sailboat
Sailboat builder
Conyplex
Sailboat designer
Sailboat range
Country
Netherlands
Construction
GRP (glass reinforced polyester):
- Hull: Sandwich E-glass vinylester (vacuum infusion)
- Deck: Sandwich E-glass vinylester (vacuum infusion)
First built hull
2013
Last built hull
Still in production
Award(s)
  • 2014: European Yacht of the Year: Luxury Cruiser
    Appendages
    Keel : fin with bulb
    Helm
    Twin helm wheels
    Rudder
    Single spade rudder
    Unsinkable
    No
    Trailerable
    No
    EC design category
     iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)

    A: Wind < force 9, Waves < 10m
    B: Wind < force 8, Waves < 8m
    C: Wind < force 6, Waves < 4m
    D: Wind < force 4, Waves < 0,5m
    A
     
    Main dimensionsContest 42CS Standard
    Overall length
    42’ 2”12.85 m
    Hull length
    42’ 2”12.85 m
    Waterline length
    38’ 7”11.76 m
    Beam (width)
    13’ 7”4.15 m
    Draft
    7’ 2”2.2 m
    Mast height from DWL
    72’ 6”22.09 m
    Light displacement (MLC)
    24251 lb11000 kg
    Ballast weight
    10141 lb4600 kg
    Ballast type
    Steel fin with lead bulb
     
    Rig and sailsContest 42CS Standard
    Upwind sail area
    1119 ft²104 m²
    Mainsail area
    614 ft²57 m²
    Genoa area
    506 ft²47 m²
    Rigging type
    Sloop Marconi 9/10
    Mast configuration
    Keel stepped mast
    Rotating spars
    No
    Number of levels of spreaders
    2
    Spreaders angle
    Swept-back
    Spars construction
    Aluminum spars (carbon fiber spars as an option)
    Standing rigging
    1x19 strand wire continuous
     
    PerformancesContest 42CS Standard
    Upwind sail area to displacement
     iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.

    The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.

    Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.
    226 ft²/T21.03 m²/T
    Displacement-length ratio (DLR)
     iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
    The DLR can be used to compare the relative mass of different sailboats no matter what their length:

    a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.
    192
    Ballast ratio
     iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.

    The higher the ballast ratio is, the greater is the stability.
    42 %
    Maximum righting moment
     iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.
    Higher the righting moment is for an angle, greater is the stability.
    86796 lb.ft12000 kg.m @ 55.00 °
    Critical hull speed
     iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
    The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.
    8.32 knots
     
    Auxiliary engineContest 42CS Standard
    Engine(s)
    1 inboard engine
    Engine(s) power
    54 HP
    Fuel type
    Diesel
    Fuel tank capacity
    23.2 gal88 liters
     
    Accommodations and layoutContest 42CS Standard
    Cockpit
    Closed aft cockpit
    Cabin(s) (min./max.)
    2 / 3
    Berth(s) (min./max.)
    4 / 8
    Head(s) (min./max.)
    1 / 2
    Freshwater tank capacity
    100.6 gal381 liters
    Boiler capacity
    10.6 gal40 liters
     
    Boat-Specs.com uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.

    Read more