| Main features | Italia 11.98 Bellissima |
Model | Italia 11.98 |
Version | Bellissima |
Hull type | Monohull |
Category | Racer-cruiser sailboat |
Sailboat builder | Italia Yachts |
Sailboat designer | |
Country | Italy |
Construction | GRP (glass reinforced polyester): - Hull: Sandwich PVC E-glass vinylester - Deck: Sandwich PVC E-glass polyester |
First built hull | 2019 |
Last built hull | Still in production |
Appendages | Keel : T-shaped keel (with bulb) |
Helm | Single tiller (helm wheel in option) |
Rudder | Single spade rudder |
Unsinkable | No |
Trailerable | No |
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)A: Wind < force 9, Waves < 10m B: Wind < force 8, Waves < 8m C: Wind < force 6, Waves < 4m D: Wind < force 4, Waves < 0,5m | A |
Standard public price ex. VAT (indicative only) | 252000 2020 |
| Main dimensions | Italia 11.98 Bellissima |
Overall length | 39’ 4”11.98 m |
Hull length | 38’ 2”11.65 m |
Beam (width) | 13’ 1”3.98 m |
Draft | 6’ 11”2.1 m |
Light displacement (MLC) | 13669 lb6200 kg |
Ballast weight | 4409 lb2000 kg |
Ballast type | Cast iron fin with lead bulb |
| Rig and sails | Italia 11.98 Bellissima |
Upwind sail area | 1001 ft²93 m² |
Downwind sail area | 1722 ft²160 m² |
Mainsail area | 538 ft²50 m² |
Jib area | 463 ft²43 m² |
Symmetric spinnaker area | 1184 ft²110 m² |
I iFore triangle height (from mast foot to fore stay top attachment) | 53’ 6”16.3 m |
J iFore triangle base (from mast foot to bottom of forestay) | 15’ 1”4.6 m |
P iMainsail hoist measurement (from tack to head) | 48’ 7”14.8 m |
E iMainsail foot measurement (from tack to clew) | 17’ 8”5.4 m |
Rigging type | Sloop Marconi 9/10 |
Mast configuration | Keel stepped mast |
Rotating spars | No |
Number of levels of spreaders | 2 |
Spreaders angle | 21 ° |
Spars construction | Aluminum spars (carbon fiber spars as an option) |
Standing rigging | 1x19 strand wire continuous |
| Performances | Italia 11.98 Bellissima |
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat. | 297 ft²/T27.56 m²/T |
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. | 510 ft²/T47.41 m²/T |
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.The higher the ballast ratio is, the greater is the stability. | 32 % |
| Auxiliary engine | Italia 11.98 Bellissima |
Engine(s) | 1 inboard engine |
Engine(s) power | 30 HP |
Fuel type | Diesel |
Fuel tank capacity | 29.1 gal110 liters |
| Accommodations and layout | Italia 11.98 Bellissima |
Cockpit | Open aft cockpit |
Cabin(s) | 3 |
Berth(s) (min./max.) | 6 / 8 |
Head(s) | 2 |
Freshwater tank capacity | 52.8 gal200 liters |
Fridge/ice-box capacity | 39.6 gal150 liters |
| Saloon | Italia 11.98 Bellissima |
Berth length | 6’ 5”1.95 m |