| Main features | Swan 115 S Standard |
Model | Swan 115 S |
Version | Standard |
Hull type | Monohull |
Category | Offshore fast cruising sailboat |
Sailboat builder | Nautor's Swan |
Sailboat designer | |
Country | Finland |
Construction | Carbon fiber reinforced epoxy: Sandwich Nomex carbon fiber epoxy |
First built hull | 2015 |
Last built hull | 2019 |
Appendages | Keel : fin with bulb |
Helm | Twin helm wheels |
Rudder | Twin spade rudders |
Unsinkable | No |
Trailerable | No |
| Main dimensions | Swan 115 S Standard |
Hull length | 115’ 6”35.2 m |
Waterline length | 107’ 8”32.84 m |
Beam (width) | 26’ 7”8.12 m |
Draft | 15’ 5”4.7 m |
Light displacement (MLC) | 209439 lb95000 kg |
Maximum displacement (MLDC) | 249976 lb113387 kg |
Ballast weight | 70548 lb32000 kg |
Ballast type | Lead |
| Rig and sails | Swan 115 S Standard |
Upwind sail area | 7026 ft²652.7 m² |
Downwind sail area | 10537 ft²978.9 m² |
Mainsail area | 3756 ft²348.9 m² |
Jib area | 3270 ft²303.8 m² |
Asymmetric spinnaker area | 6781 ft²630 m² |
I iFore triangle height (from mast foot to fore stay top attachment) | 145’ 8”44.42 m |
J iFore triangle base (from mast foot to bottom of forestay) | 43’ 10”13.35 m |
P iMainsail hoist measurement (from tack to head) | 141’ 1”43 m |
E iMainsail foot measurement (from tack to clew) | 44’ 7”13.6 m |
Rigging type | Sloop Marconi 9/10 |
Mast configuration | Keel stepped mast |
Rotating spars | No |
Spreaders angle | Swept-back |
Spars construction | Carbon fiber spars |
| Performances | Swan 115 S Standard |
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat. | 337 ft²/T31.35 m²/T |
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. | 506 ft²/T47.02 m²/T |
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat. | 76 |
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.The higher the ballast ratio is, the greater is the stability. | 34 % |
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34. | 13.91 knots |
| Auxiliary engine | Swan 115 S Standard |
Engine(s) | 1 inboard engine |
Engine(s) power | 450 HP |
Fuel type | Diesel |
Fuel tank capacity | 1452.9 gal5500 liters |
| Accommodations and layout | Swan 115 S Standard |
Cockpit | Open aft cockpit |
Cabin(s) | 7 |
Berth(s) | 14 |
Head(s) | 7 |
Freshwater tank capacity | 792.5 gal3000 liters |
Holding tank capacity | 369.8 gal1400 liters |
Boiler capacity | 58.1 gal220 liters |