Main features | Hallberg-Rassy 37 Shoal draft |
Model | Hallberg-Rassy 37 |
Version | Shoal draft |
Hull type | Monohull |
Category | Offshore cruising sailboat |
Sailboat builder | Hallberg-Rassy |
Sailboat designer | |
Country | Sweden |
Construction | GRP (glass reinforced polyester): Single skin bottom, sandwich sides and deck: Divinicell fiberglass polyester |
Number of hulls built | About 200 |
First built hull | 2003 |
Last built hull | 2012 |
Award(s) |
|
Appendages | Keel : L-shaped keel (with bulb) |
Helm | Single helm wheel |
Rudder | Single semi-spade rudder |
Unsinkable | No |
Trailerable | No |
EC design category iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)A: Wind < force 9, Waves < 10m B: Wind < force 8, Waves < 8m C: Wind < force 6, Waves < 4m D: Wind < force 4, Waves < 0,5m | A |
Main dimensions | Hallberg-Rassy 37 Shoal draft |
Hull length | 37’ 1”11.32 m |
Waterline length | 33’ 6”10.2 m |
Beam (width) | 11’ 7”3.55 m |
Draft | 5’ 2”1.6 m |
Mast height from DWL | 55’16.75 m |
Light displacement (MLC) | 16535 lb7500 kg |
Ballast weight | 7055 lb3200 kg |
Ballast type | Lead on deep GRP bilge |
Rig and sails | Hallberg-Rassy 37 Shoal draft |
Upwind sail area | 915 ft²85 m² |
Downwind sail area | 1496 ft²139 m² |
Mainsail area | 427 ft²39.7 m² |
Genoa area | 488 ft²45.3 m² |
Symmetric spinnaker area | 1069 ft²99.3 m² |
Rigging type | Sloop Marconi masthead |
Mast configuration | Deck stepped mast |
Rotating spars | No |
Number of levels of spreaders | 3 |
Spreaders angle | 0 ° |
Spars construction | Aluminum spars |
Standing rigging | 1x19 strand wire |
Performances | Hallberg-Rassy 37 Shoal draft |
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat. | 239 ft²/T22.18 m²/T |
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. | 391 ft²/T36.28 m²/T |
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat. | 200 |
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.The higher the ballast ratio is, the greater is the stability. | 43 % |
Righting moment @ 30° iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.Higher the righting moment is for an angle, greater is the stability. | 28932 lb.ft4000 kg.m |
Maximum righting moment iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle.Higher the righting moment is for an angle, greater is the stability. | 39782 lb.ft5500 kg.m @ 60.00 ° |
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34. | 7.75 knots |
Auxiliary engine | Hallberg-Rassy 37 Shoal draft |
Engine(s) | 1 inboard engine |
Engine(s) power | 55 HP |
Fuel type | Diesel |
Fuel tank capacity | 89.8 gal340 liters |
Accommodations and layout | Hallberg-Rassy 37 Shoal draft |
Cockpit | Center cockpit |
Cabin(s) | 2 |
Berth(s) (min./max.) | 5 / 8 |
Head(s) | 1 |
Freshwater tank capacity | 105.7 gal400 liters |
Boiler capacity | 10.6 gal40 liters |
Saloon | Hallberg-Rassy 37 Shoal draft |
Maximum headroom | 6’ 4”1.92 m |
Berth length | 6’ 7”2 m |
Fore cabin | Hallberg-Rassy 37 Shoal draft |
Berth length | 7’2.12 m |