The
Marlow Hunter 33 is a 33’1” (10.08m) cruising sailboat designed by
Glenn Henderson (United States). She is built since 2011 by
Marlow Hunter (United States). The
Shoal draft version is offered with a short keel fitted with large winglets. This configuration provides an interesting draft / low center of gravity / upwind performance trade-off. She has been awarded "
2012 - Cruising World - Boat of the Year: Compact cruiser".
The
Marlow Hunter 33 is as well listed, on Boat-Specs.com, in
Deep draft and
Furling mainsail version (
see all the versions compared).
Marlow Hunter 33's main features
Model
Marlow Hunter 33
Version
Shoal draft
Hull type
Monohull
Category
Cruising sailboat
Sailboat builder
Sailboat designer
Country
United States
Construction
Hull and deck: GRP (glass reinforced polyester)
First built hull
2011
Last built hull
Still in production
Award(s)
- 2012: Cruising World - Boat of the Year: Compact cruiser
Appendages
Keel : wing keel
Helm
Single helm wheel
Rudder
Single spade rudder
Unsinkable
No
Trailerable
No
EC design category
iThe CE design category indicates the ability to cope with certain weather conditions (the sailboat is designed for these conditions)
A: Wind < force 9, Waves < 10m
B: Wind < force 8, Waves < 8m
C: Wind < force 6, Waves < 4m
D: Wind < force 4, Waves < 0,5mA
Standard public price ex. VAT (indicative only)
Marlow Hunter 33's main dimensions
Overall length
33’ 6”10.21 m
Hull length
33’ 1”10.08 m
Waterline length
29’ 5”8.97 m
Beam (width)
11’ 6”3.51 m
Draft
4’ 6”1.37 m
Light displacement (MLC)
12399 lb5624 kg
Ballast weight
3578 lb1623 kg
Marlow Hunter 33's rig and sails
Upwind sail area
625 ft²58.1 m²
I
iFore triangle height (from mast foot to fore stay top attachment)37’ 5”11.41 m
J
iFore triangle base (from mast foot to bottom of forestay)10’ 10”3.3 m
P
iMainsail hoist measurement (from tack to head)36’ 5”11.1 m
E
iMainsail foot measurement (from tack to clew)13’ 10”4.22 m
Rigging type
Sloop Marconi (in-mast furling mainsail) fractional
Mast configuration
Deck stepped mast
Rotating spars
No
Number of levels of spreaders
2
Spreaders angle
Swept-back (Bergström)
Spars construction
Aluminum spars
Standing rigging
1x19 strand wire continuous
Marlow Hunter 33's performances
Upwind sail area to displacement
iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds.
The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.
Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.198 ft²/T18.37 m²/T
Displacement-length ratio (DLR)
iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet).
The DLR can be used to compare the relative mass of different sailboats no matter what their length:
a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.221
Ballast ratio
iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared.
The higher the ballast ratio is, the greater is the stability.29 %
Critical hull speed
iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed".
The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.7.27 knots
Marlow Hunter 33's auxiliary engine
Engine(s)
1 inboard engine
Engine(s) power (min./max.)
21 HP / 29 HP
Fuel type
Diesel
Fuel tank capacity
25.1 gal95 liters
Marlow Hunter 33's accommodations and layout
Cockpit
Closing aft cockpit with opening system
Cabin(s)
2
Berth(s) (min./max.)
4 / 6
Head(s)
1
Freshwater tank capacity
49.9 gal189 liters
Holding tank capacity
15.1 gal57 liters
Boiler capacity
5 gal19 liters
Maximum headroom
6’ 6”1.98 m
Have you spotted incorrect data?
You can report it in the forum or
contact the webmaster