Sun Light 30 Team / Lead Keel / Tall rig

Sailboat specifications

The Sun Light 30 is a 29’2” (8.89m) cruising sailboat designed by Andrieu Yacht Design (France). She was built between 1986 and 1991 by Jeanneau (France) with 932 hulls completed. The Team / Lead Keel / Tall rig version offers a deeper keel, longer mast, and larger sail area.

The Sun Light 30 is as well listed, on Boat-Specs.com, in Owner / Shoal draft / Short mast and Keel and centerboard version (see all the versions compared).

Sun Light 30's main features

Model: Sun Light 30
Version: Team / Lead Keel / Tall rig
Hull type: Monohull
Category: Cruising sailboat
Sailboat builder: Jeanneau
Sailboat designer: Andrieu Yacht Design
Country: France
Construction: GRP (glass reinforced polyester):
- Hull: Single skin fiberglass polyester
- Deck: Sandwich fiberglass polyester
Number of hulls built: 932
First built hull: 1986
Last built hull: 1991
Appendages: Keel : fin without bulb
Helm: Single tiller
Rudder: Single semi-spade rudder
Unsinkable: No
Trailerable: No
Former French navigation category: 2
Standard public price ex. VAT (indicative only): N/A €

Sun Light 30's main dimensions

Overall length: 30’9.15 m
Hull length: 29’ 2”8.89 m
Waterline length: 25’ 5”7.75 m
Beam (width): 10’ 5”3.18 m
Waterline beam (width): 8’ 5”2.55 m
Draft: 5’ 10”1.78 m
Mast height from D_WL: 42’ 11”13.07 m
Fore freeboard: 3’ 10”1.17 m
Mid-ship freeboard: 3’ 5”1.03 m
Light displacement (M_LC): 6834 lb3100 kg
Maximum displacement (M_LDC): 9083 lb4120 kg
Ballast weight: 2601 lb1180 kg
Ballast type: Lead
French customs tonnage: 8.12 Tx

Sun Light 30's rig and sails

Upwind sail area: 602 ft²55.89 m²
Downwind sail area: 1018 ft²94.58 m²
Mainsail area: 222 ft²20.58 m²
Genoa area: 380 ft²35.31 m²
Solent area: 262 ft²24.36 m²
Jib area: 165 ft²15.36 m²
Stormjib area: 75 ft²7 m²
Symmetric spinnaker area: 797 ft²74 m²
I iFore triangle height (from mast foot to fore stay top attachment): 41’ 2”12.55 m
J iFore triangle base (from mast foot to bottom of forestay): 12’3.65 m
P iMainsail hoist measurement (from tack to head): 36’ 7”11.15 m
E iMainsail foot measurement (from tack to clew): 9’ 10”3 m
Rigging type: Sloop Marconi masthead
Mast configuration: Deck stepped mast
Rotating spars: No
Number of levels of spreaders: 2
Spreaders angle: 0 °
Spars construction: Aluminum spars
Standing rigging: 1x19 strand wire

Sun Light 30's performances

HN (French rating) iHN or "Handicap Nationale" is an empirical rating system used in France allowing various monohulls, of different sizes and designs, to race each other fairly. It is particularly suitable for cruiser and cruiser-racer. Therefore, by comparing these values, we can have an indication of the relative speed of 2 boats.: 19.0
Upwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size. Upwind: under 18 the ratio indicates a cruise oriented sailboat with limited performances especially in light wind, while over 25 it indicates a fast sailboat.: 283 ft²/T26.29 m²/T
Downwind sail area to displacement iThe ratio sail area to displacement is obtained by dividing the sail area by the boat's displaced volume to the power two-thirds. The ratio sail area to displacement can be used to compare the relative sail plan of different sailboats no matter what their size.: 479 ft²/T44.49 m²/T
Displacement-length ratio (DLR) iThe Displacement Length Ratio (DLR) is a figure that points out the boat's weight compared to its waterline length. The DLR is obtained by dividing the boat's displacement in tons by the cube of one one-hundredth of the waterline length (in feet). The DLR can be used to compare the relative mass of different sailboats no matter what their length: a DLR less than 180 is indicative of a really light sailboat (race boat made for planning), while a DLR greater than 300 is indicative of a heavy cruising sailboat.: 189
Ballast ratio iThe Ballast ratio is an indicator of stability; it is obtained by dividing the boat's displacement by the mass of the ballast. Since the stability depends also of the hull shapes and the position of the center of gravity, only the boats with similar ballast arrangements and hull shapes should be compared. The higher the ballast ratio is, the greater is the stability.: 38 %
Wetted area: 209 ft²19.43 m²
Righting moment @ 1° iThe righting moment is a moment (torque) that tends to restore a boat to its previous position after heeling. Its value corresponds to the torque needed to heel the boat for this angle. Higher the righting moment is for an angle, greater is the stability.: 449 lb.ft62 kg.m
Maximum transverse section: 11 ft²1.03 m²
Critical hull speed iAs a ship moves in the water, it creates standing waves that oppose its movement. This effect increases dramatically the resistance when the boat reaches a speed-length ratio (speed-length ratio is the ratio between the speed in knots and the square root of the waterline length in feet) of about 1.2 (corresponding to a Froude Number of 0.35) . This very sharp rise in resistance, between speed-length ratio of 1.2 to 1.5, is insurmountable for heavy sailboats and so becomes an apparent barrier. This leads to the concept of "hull speed". The hull speed is obtained by multiplying the square root of the waterline length (in feet) by 1.34.: 6.76 knots